Новости:

Форум Infotex WeaponMod

Просмотр сообщений

В этом разделе можно просмотреть все сообщения, сделанные этим пользователем.


Сообщения - thadrumr

Страницы: [1]
1
Всем доброго времени суток! Присоединяюсь к тестириованию. Последний выложенный здесь билд.
По завершении приема - такое ощущение, что не отключается аудиотракт, точнее не всегда. И слышно фон в динамик и иногда щелчки. Если нажать на передачу - становится тихо. И так до следующего приема. Такое крайний раз наблюдал в аналоге, в ДМР проверю дополнительно.
Спасибо за труд.

I have noticed the same clicking sound after audio received on my end as well.

2
One more bit of feedback.  I have noticed that if an external speaker/mic is plugged into the radio while it is on the audio on DMR stops working.  The menu beeps and other radio alert tones stops working as well.  The analog audio continues to work fine even transmitting.  If I try and transmit to the parrot DMR talk group I don't get any response.  If the radio is powered off before plugging in the speaker/mic then power it up all works as expected while the speaker/mic is plugged in.

3
Would it possible to display both the channel name and the frequency on the screen like it has on the stock firmware?
To begin with, we need to get rid of the existing bugs  :-)

Totally fair statement and I really appreciate the work your doing on this.  I like the progress so far.  Especially having more granular power control than the stock firmware.

4
Would it possible to display both the channel name and the frequency on the screen like it has on the stock firmware?

5
thadrumr, is the scan feature on your DM-32 working with this latest firmware?  I find that my radio will scan, but it won't stop on any active transmissions.

I haven't setup the scanning yet.

6
I have noticed one thing.  At the end of each transmission the receiving end hears a loud squelch crash where the squelch is held open too long or something.  This is tested on a couple radios on multiple frequencies.  Is this something that can be adjusted in the menu?

Never mind this post.  I just figured out my other radios are doing this I just never noticed this.  This actually seems to be an issue with my Tidradio H8 not with the Dm32 or the OpenDM32 firmware.

7
Does this firmware support analog APRS?
APRS is not working.

That explains what I was seeing in the radio.  Thanks for all your hard work.  I can confirm that DPL tones are working for transmit and receive.  This was the one feature that I was waiting on getting fixed.  Keep up the great work!!!

8
Does this firmware support analog APRS?  I have it flashed on my DM32 which is working great by the way.  I can't figure out if APRS is working or not.

Страницы: [1]