avr_tnc.zip contents:

config\avrtnc_setup.exe			- AVR TNC setup program
config\src\				- Setup program source code (C + WinAPI)

microcode\configuration_bits.bmp	- Configuration bits for MCU programming
microcode\tnc2\				- MCU firmware source code
microcode\tnc2\tnc2.hex			- Firmware HEX-file

scheme\tnc.spl				- Schematics in RusPlan format
scheme\tnc.lay				- PCB in SprintLayout format
scheme\tnc.gif				-     GIF
scheme\tnc_bottom_mirrored.gif		- PCB in GIF (mirrored for LUT)
scheme\tnc_top.gif			- components placement (in GIF)

photo\					- Some TNC / modem photos

\readme.txt				- This file. :)

During development I have used this software:
Sprint Layout 5.0, RusPlan (sPlan 5.0), AVR Studio 4 (ver. 4.13), PonyProg2000 (Ver. 2.07a Beta),
Micro$oft Visual C++ 6.0

With any questions feel free to contact me via e-mails:
ur4mck@gmail.com, info@daemon.co.ua

License: This software, schematics, PCBs and source code are distributed AS IS and
it is freeware and opensource under the terms of GNU GPL v3. You are able to modify
or redistribute this product as freeware, leaving this declaration and my callsign in the
source file headers.

Good luck!
---
Dmitry
